Wood Drying Oven
Shuowei produced the wood drying kiln with the fastest drying speed and no defects in the dried wood – high frequency vacuum wood drying kiln. We can provide various types of wood drying kilns to help you solve wood drying problems.
- Fast Drying
- Dry Quick and Uniform
- Eco-Friendly
- Best Technical Support
Wood Drying oven
The wood drying oven uses celerity convection air at temperatures that cut through the boards, drying them rapidly. The design of the dryer is a fully closed unit and includes insulation, with a metal material inside and outside. Now the heated air is traveled through closed dryer, pressurized supply duct located above the boards and below if necessary. Aside from the air recirculation system and heating, kiln dryer have this an exhaust blower that is responsible for removing the moisture left in the woods while the process of burning is obviously done by the burner.
This operation is performed to successfully dry the moisturized and wet green timber and make them more workable and will help workers to avoid difficulty in their work afterwards such as warping and twisting of lumbers body, and it also prevent issues in the installed dried wood and adhesive failures in finished products. But with the help of Shuowei, problem stated would be avoided and you can save a lot of money.
Shuowei Featured Products
SWKD-4.0HFV
This wood drying kiln has a volume of 4.4 cubic meters and can hold wood up to 4 meters long. This is a small capacity dryer suitable for the wood industry such as small sawmills, furniture makers, guitar makers and carpenters. This type of high frequency vacuum wood drying kiln has same features with bigger kiln.
SWKD-6.0HFV
This wood drying kiln has a volume of 6.6 cubic meters and can hold wood up to a length of 5 meters. Small and medium-sized woodworking shops, sawmills, and other businesses typically use it. The wood is dried in a vacuum state not only quickly but also without any defects. This keeps woods natural color.
SWKD-8.0HFV
The wood drying kiln has a volume of 8.64 cubic meters and can accommodate up to 6 meters of wood. This is a medium capacity dryer for the wood industry such as medium-sized sawmills, furniture manufacturers, etc. This could avoid problems such as deformation and cracking will not occur.
SWKD-10.0HFV
The wood drying kiln has a volume of 10.08 cubic meters and can hold wood up to 7 meters long. This is a medium-capacity dryer for the wood industry such as medium-sized sawmills, furniture manufacturers, etc. This can dehumidify and dry the wood. We can adjust the moisture content of the wood independently through the high-frequency generator.
SWKD-12.0HFV
This wood drying kiln has a volume of 12.48 cubic meters and can hold wood up to 8 meters long. This is a high-capacity dryer suitable for the wood industry such as large sawmills, flooring plants, furniture manufacturers, etc. With this high frequency vacuum large wood capacity, storage of wood drying materials and running costs would be gladly reduces.
SKWD-14.0HFV
SWKD-14.0HFV high frequency vacuum wood dryer kiln is one of the large capacity wood drying kilns, the capacity is 14.56 cubic meters per full load.
It is nice to dry plank, hardwood slabs. Compared with conventional kiln dryer,high frequency vacuum wood dryer machine is flexible, less factory space needed; efficiency is much higher
Product advantages
Fast Drying
Shuowei offer a significant reduction in drying times, saving you precious time and effort.
Easy Usage
Can be installed quickly and moved easily thus better for the owners when moving and expansions are required
No Hassle
Do not require spacers between the lumber which eliminates stacking labour and sticker stain.
Eco-Friendly
Our vacuum dryer run solely on electricity thereby eliminating the need for large commercial boilers. This creates a greener footprint on the environment.
Wood Drying Oven Applications
Shuowei manufactures and stocks a wide variety of ovens for different kinds of applications. The range of options offered to meet your specific need is almost limitless and includes over-temperature protection, specialist shelves and runners, digital timers and the very latest advanced controllers.
Applications where wood drying oven uses:
- Building
- Furnitures
- Sawmill
- etc.
Wood Drying Oven Features
High frequency kiln dryer does not heat the wood directly since it may damage the wood but it only makes moisture inside the wood heating themselves and evaporates itself. This continuous drying allows the wood to dry from surface to core uniformly. Meanwhile, wood is drying under a vacuum wet and low temperature condition. It is nice to the wood and will ensure that the wood is no cracks and with nature color. Not the same as conventional steam kilns or common vacuum kilns who use hot air or heated plates to dry the wood from surface to core.
why do you need drying oven for your woods?
When the wood dries, problem such as cracking, twisting, warping and shrinking physically in it’s dimensions is possible, making the dried wood aren’t ideal for buildings, flooring or any woodworking. If it has been trimmed to a functional shape, like a square, it may reshape when time passes by. Shuowei helps the wood to be heated evenly and achieving a small difference in moisture content inside and outside the wood. Thus, effectively addresses the issue of wood cracking and bending.
Why Purchase At Shuowei?
Focused on the wood drying industry for more than 30 years, Shuowei has mastered the drying methods of various wood species, and has most collected comprehensive drying data. Shuowei vacuum wood drying kiln is the most well-known vacuum drying system based on the addition of high-frequency drying technology. High-frequency drying allows the wood to be dried quickly and uniformly, preventing problems with deformation and warping. You can manage your capital with greater ease and flexibility thanks to fast drying. You can be sure to learn everything you need to know about wood drying from this place thanks to the expert technical team working to provide you with the best technical support.
How wood drying oven works?
The combination of high frequency and vacuum generates voltage to generate a magnetic field, causing the water molecules in the wood to move at high speeds, appear to collide, and then generate heat. This method does heat the wood directly and allows the water in the wood to heat itself, allowing the wood to be heated evenly and achieving balance in moisture content inside and outside the wood. This effectively addresses the issue of wood cracking and bending.
drying effect
Obviously, when you want to achieved good drying result specially in ultra-thick wood, shuowei wood drying kiln can make you achieve that. High quality drying result is assured because Shuowei high frequency vacuum wood dryer machine equipped with hydraulic pressure system on the top, the hydraulic pressure system supply more than 6 tons pressure on the wood stacking to prevent wood deformation and bending. It is nice to the wood and will ensure that the wood is no cracks and with nature color best for your desire works.
Wood Drying Oven Parts
Circulating Fan
This part of wood kilns are usually made of aluminum alloy to be precise in die casting. It also passed several test to know it’s capabilities and strength. It can run in clockwise and counter-clockwise. The motor of our circulating fan is water-resistant and high temperature-resistant, and is a product exempted from customs examination.
Heating Coil
The finned tubes of the heating coil are made of stainless steel and aluminum alloy. This part is light weight, kind of steam-resistant, anti-corrosion and anti-rust and high thermal efficient. This heating coil is appropriate design, fast and easy installations.
Electric Valve
This component is small in volume, has efficient heat-control, top-notch and reliable performance. This electric valve can precisely control the temperature increasement and decrement, and the quantity of steam, which can be save.
Moisture Content, Temperature Anometer
In every kiln, there different temperature checker which can directly show the changes of temperature and moisture content inside the kiln. That anometer are made of stainless steel and joints are imported, that ensure accurate and precise measurement. The data transmission adopts special high temperature-resistant cables, which ensure the signals can be transported without intrusion.
Vent Motor
The vent motor can be controlled from 0 degree to 90 degrees according to the temperature in the kiln. This operation can be controlled outside of the kiln which is safest. The vent motor is made by superior performance and high reliability.
drying chamber
This is where the wood drying and moisture evaporations happens. Humidity and temperature is being controlled so that the moisture content of wood can be reduced to a target point without having any drying defects. It also produces temperatures sufficient to complete some process, such as hardening, drying, or chemical changes.
Wood Drying oven shell
This is the outer part that serves as the protector of the product. This is made out of high quality material such as;
- Aluminum
- Alloy
- Stainless Steel
- and different kinds of hard material
Making the product more sufficient and more enduring.
The Most Reliable manufacturer
Shuowei is not only an experienced manufacturer with more than 30 years experiences. But also adopted sophisticated manufacturing equipment and professional production lines to ensure the high quality of vacuum dryer machine. Shuowei’s sales team are with more than 15 years international trade experiences, which will ensure no worries about importing issues.
Shuowei service
- After sales service
Shuowei offers full working life after-sale service and 24/7 hours online service to solve all the questions. We have a team of professional engineers, without any language barrier, to provide you with professional technical services.
- Technical Support
Our technical teams are rich experiences in wood drying, if your any question about wood drying, especially for difficult drying hardwood block,slab,and special wood species drying questions. welcome contact us.
Have more questions please contact us
Bottom FAQ
After you place the order, we need 25 days to finish the production and testing of the high frequency vacuum wood dryer kiln. and then we will arrange the latest shipment. If you have plan to purchase this high frequency vacuum wood dryer kiln from us, please contact us ahead of time, we do not have many ready stocks for such machines for requirements varies from different clients.
The vacuum chamber is make of stainless steel, so it is very tough, and the daily maintenance work is just some cleaning after finishing one drying cycle. The main electronic components are all using top brand (like Schneider) and the high frequency generator is with a self-protect programs, so the maintain costs could be almost ignored.
Spark protection is one of our kiln’s self protection program, if some wrong connection bring spark inside of the high frequency vacuum wood dryer kiln, the kiln will power off immediately. Another reason it won’t catching fire is the vacuum, inside of the wood dryer kiln is a vacuum condition, even if it is sparked, it won’t fire. Because no oxygen. So no worry about the fire, if sparked, the operator just need check the connection will be ok.
The warranty of Shuowei high frequency vacuum wood dryer kiln is one year since received the dryer. If any part damaged because of non-human factors, we will send new parts for replacement free.
Compared with the air seasoning and conventional kiln drying, high frequency vacuum wood dryer kiln has greatly shorten the drying circle, you do not need wait years or months to get quality dried wood any more. The average drying time is 4-15 days to finish whole dry process.
Before finding a proper type, the main factors to consider are as below
- Wood species (walnut,ash, acacia, rosewood,oak,pine,teak, Africa hardwood etc.)
- Thickness in mm of your wood slab Initial moisture and target moisture
Kiln drying your own wood at home can be a great way to sustainably harvest the materials around you, and dry it fast enough to build furniture with.
Drying wood in a kiln helps keep the wood from shrinking. Reclaimed wood that has shrunk is much harder to install and can cause a lot of unnecessary headaches during and after the installation process. Removing the wood’s moisture in a kiln ensures the wood remains a consistent size even after it has been installed
Woods like pine and willow will dry the fastest, but you will need a lot of them to keep you warm over a long winter.
We'd like to work with you
If you have any questions or request a quote, please send us a message. Our experts will reply you within 24 hours and help you choose your suitable wood drying kiln, and can also help you solve wood drying problems.
