It is widely acknowledged that action to improve the preservation of forests around the globe is a good idea. This is due to the fact that unlike other crops trees need a man’s lifespan or more time to reach the size needed for timber.
It is not a natural process to follow demand when this long time is needed to produce the material. Forestation prior to the requirement is, consequently, essential to ensure an abundance for the future Conservation is required to expand existing resources to meet the requirements of the people who are living today. As we can’t at any time expand the number of mature trees, we have two paths of conservation that are open to us. One is to limit the destruction of forests through the fire, disease, and unneeded destruction, and the second is to cut down on the amount of waste that is generated by current systems of use.
The subject of avoidable waste has been addressed in previous articles. There is only one specific aspect that I will try to address the issue concerns the seasoning of wood. The fact that poor methods of seasoning are the reason for the huge losses of wood cut from the virgin growth forests can not be denied as it is the wood that is cut from mature trees that require generations of reproduction and is vital to protect, the issue to a proper and regulated seasoning process is that is of great concern to all timber producing countries.
THE REASON FOR WOOD LOSSES
The easiest method to prepare the green material to be used is to allow it to dry naturally through exposure to air. It is likely that the majority of the timber that is harvested is dried that way. It is estimated that 6 percent of the lumber cut across the United States is air seasoned without kiln drying as well in some other nations, this percentage is said to be greater.
Furthermore, the majority of timber that goes through the kiln drying process prior to being used for manufacturing is air-seasoned. In the course of drying with air, significant losses are incurred. There is no information available regarding the global total loss however, a reasonable estimation in the United States would be that at minimum 12 percent of the total amount of wood that is air dried has been degraded, and the majority of it is gone. In tropical nations, the loss is significantly higher. Based on research conducted in the laboratory it has been discovered that it is possible to limit all loss to less than five percent by placing the newly sawed wood directly into the kilns that are dry.
KILN DRYING AS AN AID TO CONSERVATION
It is important to note that the estimates above are based upon all current seasoning losses, both dry air and kiln drying. What percentage of this loss can be prevented through the widespread adoption of better techniques is a different issue.
The answer is not just about technological possibilities, but also economic factors. In terms of technical aspects, it is feasible using proper drying methods to decrease the loss by at least 95 percent In the present market conditions it will be feasible to cut it down to at least half. Artificial seasoning usually takes place by means of an apparatus known as”a ” dry kiln ” and the process is known as ” kiln drying “.
The procedure should not be seen as like the kilning of lime or ceramics or the kiln combustion of charcoal, because the chemical changes caused by high temperatures aren’t desirable in the case of woods. “Wood conditioning” is a term that has been used in the past ” wood conditioning ” has been suggested as being more suitable as opposed to ” kiln drying ” but the former has become popular enough commercially to be changed and is likely to continue in usage.
In terms of natural resources, the principal function of kiln drying in comparison to air seasoning is in the possibility of removing the risk of injuries and waste that are typical side effects of air seasoning such as stain, decay, checking, and warping.
THE POSSIBILITY TO SAVE WOOD FROM WASTING
However, the possibility of reversing current losses to virgin-grown forest materials does not constitute the most crucial aspect of kiln drying from a conservation perspective.
Actually, the possibility of finding a solution to the issue of using trees that are unexplored in tropical forests could be the biggest hope for the future in reducing the destruction of the forests in that zone of temperate. In Burma, for instance, teak is currently the main timber cut however there are at the very least 33 other species with a proven commercial value along with a variety of others that are certain to be valuable when properly seasoned, however, their value is currently not well-known. In India, the Indian government is currently experimenting with using clear-cutting as well as artificial seasoning to make use of the species that are not being utilized. In the Malay Peninsula, it is stated that species with a number of 3,000 have been interspersed among the forests. similar conditions are prevalent in Brazil.
UTILIZING THE KILN DRYING METHOD
We are all aware that to make a quality wood product, it takes time to find an established tree from the forest. If we do not take action on the issue of wood waste then the wood industry might be halted for a while as it will take time for the forest to grow back. If we make the most of what we took from the forest, it will greatly benefit us.
According to research, it is believed that kiln drying will become the next major thing to be seen in the wooden industry due to the fact that it produces high-quality products, but also the objective of the method is to keep more wood from the destruction of decay and mold. According to specialists, there are many problems in the timber industry as the wood is not dried correctly, which leads to decay and mold on the wood. To solve this issue, we should look for ways to effectively dry the wood. the kiln-drying process can be a significant factor in helping resolve this problem. When the lumber is run directly into the kiln that is dry after it has been sawed, staining can be eliminated completely.
THE ROI OF KILN DRYING
We are all aware that to make a quality wood product, it takes time to find an established tree from the forest. If we do not take action on the issue of wood waste then the wood industry might be halted for a while as it will take time for the forest to grow back. If we make the most of what we took from the forest, it will greatly benefit us.
According to research, it is believed that kiln drying will become the next major thing to be seen in the wooden industry due to the fact that it produces high-quality products, but also the objective of the method is to keep more wood from the destruction of decay and mold. According to specialists, there are many problems in the timber industry as the wood is not dried correctly, which leads to decay and mold on the wood. To solve this issue, we should look for ways to effectively dry the wood. the kiln-drying process can be a significant factor in helping resolve this problem. When the lumber is run directly into the kiln that is dry after it has been sawed, staining can be eliminated completely.
THE ROI OF KILN DRYING
One of the concerns of proprietors is about the ROI (Return of investments) for the kiln drying business. To make it easier for everyone to use the method of kiln drying, it is an investment worth it because it can produce high-quality dried wood. It also will save lots of wood, and the wasted is significantly reduced. This raises the question, are business owners able to actually see the return on their investment? Yes, since a kiln-drying machine will last for a long time. In the long run, it could be better than the earlier drying technique (air-drying). If you’re an owner of a business that uses wood drying, you must think about using this technique (kiln-drying) to aid in conserving wood in the near future.
CONCLUSION
There are a variety of wood drying methods but the kiln drying method is the future of the wood drying industry, it offers many advantages for wood drying and dried wood industries. We at HeBei Shouwei invented the most efficient kiln-drying equipment to aid the drying of wood and assist even small-scale entrepreneurs to dry their wood properly. Should you need to ask any queries, we can be reached and we will further talk with you about our products.
